home *** CD-ROM | disk | FTP | other *** search
-
- ------------------ README.TXT FOR THE LASER LETTERHEAD KIT -------------------
-
- Thank you for your trial use of The Laser Letterhead Kit. You will need an IBM
- 286, 386, 486, or higher computer (no special extended or expanded memory
- requirements), DOS 3.0 or higher, and a Hewlett-Packard LaserJet printer or a
- 100% compatible. All LaserJet printers, except the original LaserJet, may be
- used. The printer must use HP's Printer Command Language (PCL) version 4 or
- higher. Dot Matrix and most ink jet printers do not use this command language.
- The Kit will install on a hard disk or floppy diskette, 720K or larger. A 360K
- diskette will not hold the files expanded during the INSTALL program.
-
- There should be five files on this disk:
-
- (1) FONTS.EXE (2) INSTALL.EXE (3) LLHK.EXE (4) PCX.EXE (5) README.TXT
-
- If any of these 5 files are missing, please contact your shareware distributor
- or CPI Sofware. It is necessary to use the INSTALL program to properly set up
- the files and enter your installation input into The Laser Letterhead Kit's
- setup program. Immediately after the installation you may print letterheads.
-
- All of the necessary PCL bit map soft fonts and PCX images are included in the
- above. You do not need an additional program to download soft fonts to your
- laser printer. Nothing more is needed. The Laser Letterhead Kit does it all.
-
- You may install The Kit by placing this disk into any floppy drive on your
- computer, logging on to that drive, and typing:
-
- INSTALL (then strike the ENTER key)
-
- Follow the on screen instructions. After The Laser Letterhead Kit is installed,
- the README.DOC file will be available in the directory or on the diskette
- where you placed the program files. The README.DOC file contains instructions
- for using and customizing The Kit.
-
- You may view the README.DOC file by logging on to the directory or diskette
- where The Laser Letterhead Kit is located, and typing:
-
- BROWSE README.DOC (then strike ENTER key)
-
- Since you will need to use the README.DOC file as INSTRUCTIONS when The Kit is
- up and running, you may want to print a copy on your laser printer by typing
- either of the two commands, while logged on to The Kit's directory or diskette:
-
- PRINT README.DOC or, TYPE README.DOC > PRN (then stike ENTER key)
-
- The README.DOC file is 5 pages long and will supply you will all necessary
- information to operate and customize The Laser Letterhead Kit to your needs.
-
- This is a product of:
-
- CPI Software
- Post Office Box 47097
- Saint Petersburg
- Florida 33743-7097
-
- Technical Assistance
- Voice/Message/Fax
- 813-544-0212
-
-
-
-
- Member of the
- Association of Shareware
- Authors and Distributors
-
- The Laser Letterhead Kit has been produced by a member of the Association of
- Shareware Authors and Distributors, and as such, has met their demands for
- professional programming. Any problems of a shareware nature that cannot
- be resolved by CPI Software, may be brought to the attention of the ASAD
- Ombudsman for possible correction. Please send all information, including
- the name and address of the person or company you received The Laser
- Letterhead Kit from, to: ASAD, ATTN: Ombudsman, 2425 North Limestone Street,
- Springfield, Ohio 45503-1109.
-
-
- -------------------------------------------------------------------------------
- REGISTRATION FORM
- -------------------------------------------------------------------------------
- Registration will entitle you to receive the Commercial Edition of Laser
- Letterhead plus, a printed Handbook, and the Basic Customizing PCX Pak. The
- PCX Pak contains forms for obtaining one PCX text based logo, one PCX
- letterhead image, and one PCX watermark image at NO COST TO YOU. You will
- also receive 7 typeface font families encompassing 68 PCL soft font files.
- Do not include instructions for creating your free letterhead, logo, and
- watermark. This is done with the PCX Pak above after it is received.
-
-
- Name:________________________________________Telephone:(_____)____________
-
- Business Name:____________________________________________________________
-
- Street Address:___________________________________________________________
-
- City, State, Zip:_________________________________________________________
-
- Disk Size: __1.2M HD 5.25" __1.4M HD 3.5" Laser Name:_________ RAM:_______
-
- Check if User is Vision Impaired & Requires Large Screen Font Driver:_____
-
- Registration Fee: Each Single User...............: ___@ $25.00....:_______
-
- Florida Residents Add 6% State Sales Tax (Pinellas County 7%).....:_______
-
- Shipping/Handling for US or Canada add $4.95 (Others add 8.95)....:_______
-
- Total.............................................................:_______
-
- Make Checks/Money Orders Payable to CPI Software and Send with this form to:
- PO Box 47097, St. Petersburg, Florida 33743-7097 USA - FAX 813 544-0212
- All Currency in US dollars Drawn on a Bank or Branch Located in the USA
- - Allow up to 2 or 3 Weeks for Processing and Delivery - VER 35K10193 -
-
- ---------------------------- END OF README.TXT ------------------------------